User Tools

Site Tools


Sidebar



ultimaker

Ultimaker

stillere fan
cura-build
cura-build on osx 10.11
doodle3d startcode/endcode for Doodle3D Ultimaker 2/2go
;Generated with Doodle3D (ultimaker2)
M10000
G4 P200
M10000
M10001 X10 Y25 SHeating nozzle...
M109 S{printingTemp} ;set target temperature 
{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature
M10000
G4 P200 
M10000
M10001 X3 Y25 SDoodle3D Printing...
M10004 X1 Y56 W128 H8
M10003 X1 Y56 W10 H8
G21 ;metric values
G90 ;absolute positioning
M107 ;start with the fan off
G28 ; home to endstops
G1 Z15 F9000 ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E10 ;extrude 10mm of feed stock
G92 E0 ;zero the extruded length again
G1 F9000
M117 Printing Doodle...   ;display message (20 characters to clear whole screen)
M107 ;fan off
G91 ;relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more

M10000
;G4 P5
M10000
M10001 X10 Y25 SDoodle3D finished!

G28 ;home the printer
M84 ;disable axes / steppers
G90 ;absolute positioning
M104 S{preheatTemp}
{if heatedBed}M140 S{preheatBedTemp}
M117 Done                 ;display message (20 characters to clear whole screen)
help
boutjes en moertjes
build marlin firmware
Cura
  • firmware backuppen:
avrdude -c stk500v1 -b57600 -p atmega1280 -P /dev/tty.usbserial-A600f8w2 -D -Uflash:r:firmware.hex:i

of

avrdude -c stk500v2 -b115200 -p atmega2560 -P /dev/tty.usbmodem411 -D -Uflash:r:firmware.hex:i
  • writing firmware
    <code bash>
    avrdude -c stk500v2 -b115200 -p atmega2560 -P /dev/tty.usbmodem411 -D -Uflash:w:firmware.hex:i
    </code>
    <code bash>
    avrdude -c stk500v2 -b115200 -p atmega2560 -P /dev/tty.usbmodem621 -D -Uflash:w:cfg_4fd875a44fb67.hex.txt:i
    </code>
avrdude -c stk500v1 -b57600 -p atmega1280 -P /dev/tty.usbserial-A9005d8c -D -Uflash:w:firmware.hex:i
PLA
ultimaker.txt · Last modified: 2016/05/06 17:11 by rick